this product manufactured with lead-free processing pb c2-d-et c3-d-et c1-a-sg do not scale from this print .300 7.62 ref .438 11.12 ref .489 12.41 ref sub-eqrp-x-xxx-xx-xx sub-eqrp-x-xxx-xx-xx sub-ttf-32100-09-01-xx.xx eqd-xx-02 eqd-xx-01 xx.xx + "b" ref (see table 3) (overall length) "a" ref .745 18.93 ref xx.xx 1% (cable length) n-1 (see table 2) 01 02 n (see table 2) 02 01 n (see table 2) n-1 (see table 2) sts-04 (see note 7) hdrl-11 (see note 5) (top cable removed for clarity) .370 9.39 ref (typ) .319 8.10 ref (typ) all cable terminations to be potted with uv epoxy (see note 10) end option -f: screw option first end only -s: screw option second end only -b: screw option both ends -n: no cap option both ends (see sheet 3, figure 3 for details) (leave blank for standard housings) no of pairs -018, -036, -054 (number of pairs) wiring option -1: pin 1 to pin 1 -2: pin 1 to pin 2 -3: pin 1 to pin n-1 -4: pin 1 to pin n (see table 6, sheet 4) second end -ttr: terminal, top, right -ttl: terminal, top, left -tbr: terminal, bottom, right -tbl: terminal, bottom, left -str: socket, top, right -stl: socket, top, left -sbr: socket, bottom, right -sbl: socket, bottom, left first end -ttr: terminal, top, right -ttl: terminal, top, left -tbr: terminal, bottom, right -tbl: terminal, bottom, left -str: socket, top, right -stl: socket, top, left -sbr: socket, bottom, right -sbl: socket, bottom, left eqrp-xxx-xx.xx-xxx-xxx-x-x length second end fig. 1 (eqrp-018-xx.xx-ttl-str-x-x shown) first end -xx.xx (inches) (03.75[95.3] min) (see note 8) (see note 9) c c c c d d 0.8mm q-rate twinax cable assembly sheet of by: eqrp-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing j. riley 08/10/09 4 1 sheet scale: 1:1 eqrp-xxx-xx.xx-xxx-xxx-x-x revision d tolerances do not apply to reference dimensions. .xx: .01[.3] 2 .xxx: .005[.13] .xxxx: .0020[.051] decimals angles tolerances are: unless otherwise specified, dimensions are in inches. decimals angles f:\dwg\sw\exisprod\assembly\hdr\point8mm\eqrp-xxx-xx.xx-xxx-xxx-x-x.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
01 02 n n-1 t9 t1 01 02 n n-1 t9 t1 01 02 n n-1 b9 b1 01 02 n n-1 b9 b1 01 02 n n-1 t1 t9 01 02 n n-1 t9 t1 01 02 n n-1 b1 b9 01 02 n n-1 b1 b9 t b b t b t t b t b t b t b b t .129 3.28 ref (typ) "c" ref "d" ref .187 4.76 ref (typ) "e" ref .228 5.79 eqd-xx-01 eqd-xx-02-sdo first end fig. 2 (screw down option shown) (assembly the same, except as shown) -tbl -tbr -ttl -ttr -sbl -sbr -stl -str d 0.8mm q-rate twinax cable assembly sheet of by: eqrp-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing j. riley 08/10/09 4 2 sheet scale: 1:1 eqrp-xxx-xx.xx-xxx-xxx-x-x f:\dwg\sw\exisprod\assembly\hdr\point8mm\eqrp-xxx-xx.xx-xxx-xxx-x-x.slddrw revision d 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
01 02 n-1 n t9 t1 01 02 n-1 n t1 t9 01 02 n-1 n b9 b1 01 02 n-1 n b9 b1 01 02 n-1 n t9 t1 01 02 n-1 n t9 t1 01 02 n-1 n b9 b1 01 02 n-1 n b1 b9 b t t b b t t b b t t b b t b t .370 9.39 ref (typ) .319 8.10 ref (typ) .600 15.24 ref (typ) "f" ref second end -str -stl -sbr -sbl -tbl -tbr -ttl -ttr fig. 3 (eqrp-018-xx.xx-ttl-str-x-x shown) (assembly the same, except as shown) all cable terminations to be potted with uv epoxy 0.8mm q-rate twinax cable assembly sheet of by: eqrp-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing j. riley 08/10/09 4 3 sheet scale: 1:1 eqrp-xxx-xx.xx-xxx-xxx-x-x f:\dwg\sw\exisprod\assembly\hdr\point8mm\eqrp-xxx-xx.xx-xxx-xxx-x-x.slddrw revision d 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
(ground blade tied to coax shield) 0.8mm q-rate twinax cable assembly sheet of by: eqrp-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing j. riley 08/10/09 4 4 sheet scale: 1:1 eqrp-xxx-xx.xx-xxx-xxx-x-x f:\dwg\sw\exisprod\assembly\hdr\point8mm\eqrp-xxx-xx.xx-xxx-xxx-x-x.slddrw revision d 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
